Last updated: 21 August 2020

What type of plugs and sockets are used in Greece?

In Greece, plug and socket types C and F are the official standards. Like almost all Continental European countries, Greece has standardized on the German plug and socket system.




Type F

  • used almost everywhere in Europe & Russia, except for the UK & Ireland
  • 2 pins
  • grounded
  • 16 A
  • 220 – 240 V
  • socket compatible with plug types C, E & F
Learn more

Type C

  • commonly used in Europe, South America & Asia
  • 2 pins
  • not grounded
  • 2.5 A, 10 A & 16 A
  • almost always 220 – 240 V
  • socket compatible with plug type C
Learn more




What is the mains voltage in Greece?

Just like the rest of Europe, the voltage in Greece is 230 volts and the frequency is 50 Hz.

230 V ~ 50 Hz



Background information

Obsolete type C Bakelite wall socket (1950s)

Greece has standardized on type F sockets and plugs. Type C and type E plugs can also be used thanks to their compatibility with type F sockets.

Power plug & outlet Type C

Typically, type C plug sockets are not allowed to be installed in Greece: these outlets are not earthed and are therefore considered dangerous. Only type F power points are permitted because they are grounded and therefore significantly safer.

The only (and rare) exception to this rule is that an old type C outlet should be replaced by a new one. After all, if you hook up a grounded wall outlet (i.e. type F) on a two-wire circuit, the socket will not be grounded, but people will get the wrong impression that it is actually grounded. No need to say, this would be a potentially dangerous situation.

Nowadays, however, type C receptacles are not frequently installed anymore, since older properties are almost always completely rewired when they are renovated or significantly altered.

Power plug & outlet Type E

Obsolete type E plug, i.e. without top and bottom earthing clips nor plastic notches on the left and right.

Some Continental European countries, like France and Belgium for instance, don’t have the same plug and socket standard as Greece. This used to be a problem because French type E plugs and sockets were initially incompatible with type F. The reason for the incompatibility was that grounding in the type E socket is accomplished with a round male pin, which is permanently mounted in the socket. Type F outlets, on the other hand, are earthed by means of two sprung metal strips on the inside edge of the recessed socket which make a friction connection with similar metal strips on the sides of the plug body.

Old type F plugs did not have a grounding hole to accept the earth pin of the type E socket and old type E plugs did not have top and bottom indentations with earthing clips to mate with the type F socket. Moreover, old type E plugs were perfectly round and lacked a necessary pair of plastic notches on the left and right side to fit the type F socket.

Fortunately, the now standard hybrid E/F plug (officially called CEE 7/7) was developed in order to bridge the differences between E and F sockets, so technically type E and F plugs (not the sockets) have now become 100% identical.

Click here for a global map showing the spread of the different plug types used around the world.

Click here for a detailed list of the countries of the world with their respective plug and outlet types, voltage and frequency.

Check out all plug types used around the world